|
|
|
| Compression measurements on EMC amplifiers |
| 글쓴이 : 아이티씨
날짜 : 21-08-04 13:48
조회 : 9903
|
|
 WP7_Compression_measurements_on_EMC_amplifiers_Raditeq.pdf (158.2K), Down : 401, 2021-08-04 13:48:20 |
|
|
EMC immunity testing
When performing EMC immunity tests, the linearity of the used RF power amplifier must be checked
at all applicable test frequencies. The verification shall be performed as follows:
Determine the power required to generate the desired test level, INCLUDING modulation. For example:
Test level : 10 V/m
Modulation : 80% AM, 1 kHz
Required field strength including modulation : 18 V/m.
The required power at a specific frequency is determined by the calibration file that was measured
during the n-point homogeneity calibration (in the example above, the power to generate 18 V/m in the homogeneous plane)
다운로드 받아 주세요~~~~~
|
|
|
